Post by dinosauria101 on Jun 15, 2019 9:51:48 GMT 5
Megaraptor namunhuaiquii (pack of 2)
Megaraptor was initially described as a giant dromaeosaur, known primarily from a single claw (about 1 ft/0.30 m long) that resembled the sickle-shaped foot claw of dromaeosaurids. The discovery of a complete front limb, however, showed that this giant claw actually came from the first finger of the hand. The hands were unusually elongated, bearing sickle-shaped claws even more recurved than those of spinosaurids. The hand is quite distinct from other basal tetanurans, so it was not initially clear whether Megaraptor was an allosaurid, a carcharodontosaurid, a spinosauroid, or something else entirely. Subsequent studies, as well as the identification of close relatives with similar large claws on the forelimbs (see below), have helped identify Megaraptor as a highly advanced and lightly-built allosauroid, and a member of the family Neovenatoridae. In 2010, Gregory S. Paul estimated its length at 8 metres (26 ft), its weight at 1 tonne (2,200 lb).
NOTE: Megaraptor was actually a tyrannosauroid and ranged from 1-2 tons, 1.5 tons average.
Daspletosaurus torosus
While very large by the standard of modern predators, Daspletosaurus was not the largest tyrannosaurid. Adults could reach a length of 8–9 meters (26–30 ft) from snout to tail. Mass estimates have centered on 2.5 t (2.5 long tons; 2.8 short tons), but have ranged between 1.8 and 3.8 t (1.8 and 3.7 long tons; 2.0 and 4.2 short tons). Daspletosaurus had a massive skull that could reach more than 1 meter (3.3 ft) in length. The bones were heavily constructed and some, including the nasal bones on top of the snout, were fused for strength. Large fenestrae (openings) in the skull reduced its weight. An adult Daspletosaurus was armed with about six dozen teeth that were very long but oval in cross section rather than blade-like. Unlike its other teeth, those in the premaxilla at the end of the upper jaw had a D-shaped cross section, an example of heterodonty always seen in tyrannosaurids. Unique skull features included the rough outer surface of the maxilla (upper jaw bone) and the pronounced crests around the eyes on the lacrimal, postorbital, and jugal bones. The orbit (eye socket) was a tall oval, somewhere in between the circular shape seen in Gorgosaurus and the 'keyhole' shape of Tyrannosaurus.
Credit to Wikipedia
Megaraptor was initially described as a giant dromaeosaur, known primarily from a single claw (about 1 ft/0.30 m long) that resembled the sickle-shaped foot claw of dromaeosaurids. The discovery of a complete front limb, however, showed that this giant claw actually came from the first finger of the hand. The hands were unusually elongated, bearing sickle-shaped claws even more recurved than those of spinosaurids. The hand is quite distinct from other basal tetanurans, so it was not initially clear whether Megaraptor was an allosaurid, a carcharodontosaurid, a spinosauroid, or something else entirely. Subsequent studies, as well as the identification of close relatives with similar large claws on the forelimbs (see below), have helped identify Megaraptor as a highly advanced and lightly-built allosauroid, and a member of the family Neovenatoridae. In 2010, Gregory S. Paul estimated its length at 8 metres (26 ft), its weight at 1 tonne (2,200 lb).
NOTE: Megaraptor was actually a tyrannosauroid and ranged from 1-2 tons, 1.5 tons average.
Daspletosaurus torosus
While very large by the standard of modern predators, Daspletosaurus was not the largest tyrannosaurid. Adults could reach a length of 8–9 meters (26–30 ft) from snout to tail. Mass estimates have centered on 2.5 t (2.5 long tons; 2.8 short tons), but have ranged between 1.8 and 3.8 t (1.8 and 3.7 long tons; 2.0 and 4.2 short tons). Daspletosaurus had a massive skull that could reach more than 1 meter (3.3 ft) in length. The bones were heavily constructed and some, including the nasal bones on top of the snout, were fused for strength. Large fenestrae (openings) in the skull reduced its weight. An adult Daspletosaurus was armed with about six dozen teeth that were very long but oval in cross section rather than blade-like. Unlike its other teeth, those in the premaxilla at the end of the upper jaw had a D-shaped cross section, an example of heterodonty always seen in tyrannosaurids. Unique skull features included the rough outer surface of the maxilla (upper jaw bone) and the pronounced crests around the eyes on the lacrimal, postorbital, and jugal bones. The orbit (eye socket) was a tall oval, somewhere in between the circular shape seen in Gorgosaurus and the 'keyhole' shape of Tyrannosaurus.
Credit to Wikipedia